Fireproof additive for paint.
Envase deÂ 0,24 litros.
Warning: Last items in stock!
Flamex PA is comparable to the P50. However, do not mix old and new Flamex products. Use it to treat:
Flamex PA is a clear, un-pigmented additive for creating a flame retardant paint layer. Add one full jar of Roscoflamex PA to a US gallon (3.79L) of water based paint to make your paint coating flame retardant. Roscoflamex PA is compatible in most latex or vinyl acrylic paints but always test with your specific paint choice. Do not use Roscoflamex PA with metallic paints as the metal pigments may react and tarnish or corrode. Roscoflamex PA does NOT alter the flammability of the substrate being painted but only adds a retardant treatment that slows the spread of fire along the surface.
Using Roscoflamex PA
Once it has been pre-measured it should be added to a single US Gallon (3.79L) of paint. Once combined, the paint/Flamex mixture can be diluted as desired but the dry paint film must be no less than 4 mil in thickness. The effectiveness of a fire retardant barrier is dependent on both the fire retardant additive and the thickness of the coating. Roscoflamex PA is not intended to be used in place of other Roscoflamex products. Where possible, always treat the substrate material using the appropriate Roscoflamex product.
Note: When using Roscoflamex PA in Rosco Supersaturated paint add one 0.24L of PA to a 1/4 gallon (0.95 l) of undiluted Supersaturated and then dilute this mixture at least 1:1 with water. Mix thoroughly before using.
0,24L of Roscoflamex PA mixed into one gallon (3.8 l)of paint will treat approximately 28 m2 of material as per paint manufacturer's guidelines.
Applying Roscoflamex PA
Certification and Testing
Rosco Flamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A.
Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.
Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.
Different payment methods accepted
15 days for returns
Personalized Customer Care
Fast and safe delivery of the material