They can be used to create special effects using ultraviolet black light or combined with other Rosco Scenic Paints to make the colors more vibrant. Fluorescents use the same high quality, water-base, vinyl acrylic binder found in Off Broadway Paints. It is suitable for use on most surfaces after the surface has been properly prepped. Use Rosco fluorescent paints to match the brightest colors of the Pantone Matching System or to obtain impressive 3-D effects.
BINDER TYPE:Vinyl Acrylic
DILUTION:Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint and may reduce the brightness of the "glow."
SURFACE PREPARATION:Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
APPLICATION:Stir contents well before use. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 0.5 mm dry film.
COVERAGE: Approx 33 square meters per gallon (8.6 m2/l).
AVG DRY TIME:At 24ºC (75ºF) dries to the touch in 30 minutos. Can be recoated in 1-2 hours.
CLEANING: Soap and water.
SHELF LIFE:Minimum 24 months