Imprimación Tough Prime

ROSCO Tough Prime

Tough Prime is an excellent primer with special properties that allow it to bond to the hard-to-prime materials found in every scene shop. 1 Gallon (3.8 litros)

  • Black
  • White
IMPORTANT - BEFORE YOUR PURCHASE Check with Cinetools to select size and material.
Tax excluded


Tough Prime covers most surfaces, including PVC plastics, aluminum and other metals, foams and plastics, muslin and wood. This quick drying acrylic primer dries to a durable, water-resistant coating which can be painted over with virtually any paint, water or solvent based.

SUGGESTED USE: Use Tough Prime to prepare almost any surface for painting. Tough Prime can be used to prime Vinyl Projection Screen and Dance Floor, even carpet. Tough Prime Black is perfect for stage floors and proscenium arches, resisting scuffs and abrasions while providing a rich black finish.

FINISH: White: Semi-gloss, Black: Satin 


BINDER TYPE: Acrylic polymer

Use Tough Prime undiluted for most applications. When applying by brush, it may be necessary to dilute with water to achieve the proper viscosity.

Surfaces should be clean, dry and free from dirt and grease. If painting over an existing paint finish, remove any loose material with a brush. When painting over solvent based finishes, or high gloss surfaces, use fine sandpaper or steel wool to give the surface more tooth. Be sure to remove all sanding dust for best adhesion. 

Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking. Do not apply a heavy coat. To build up a more durable finish, apply several thin coats, allowing each to dry thoroughly between applications.

Tough Prime is compatible with Rosco Scenic Paints and most other paints as well. Always test before using if unsure. Tough Prime can be tinted using Supersaturated Rosco Scenic Paint, colorants and other water-based paints.

FILM THICKNESS: 0.8 mm dry film.

COVERAGE: Approx. 33 square meters poer gallon (8.6 m2/l).

DRY TIME: at 24ºC (75ºF) dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.

CLEANING: Water and soap.

SHELF LIFE: Minimum 24 months.

Product Details

Product added to wishlist

We use our own and third-party cookies to collect information to improve our services and to analyse your browsing habits. If you continue browsing, you accept their installation. You can configure your browser to prevent their installation.